Welcome to our online store! You MUST be 19 years old to access this site.

Cart:

0 item(s) - CA$0.00
You have no items in your shopping cart.

0

RDAS

RDA is short for rebuildable dripping atomizer and is an advanced atomizer without tank where e-juice is added between puffs. All the parts are interchangeable and, above all, you build the coil yourself. The coil can be built in numerous ways with different materials such as mesh, silica or cotton along with a resistance wire which Kanthal is the common choice.

9 Item(s)

Grid  List 

  1. Authentic Hollowpoint V2 RDA By Tobeco

    Authentic Hollowpoint V2 RDA By Tobeco

    The Hollow Point v2 RDA is a new design based on the original design made by Tobeco. It has a few upgrades from the original! It’s unique tapered top cap / drip tip give it a look very similar to a hollow point bullet. Tobeco Hollow Point v2 RDA made from stainless steel with a delrin drip tip. It has three lightning bolt shaped air holes (similar to the original, but instead of one hole for each lightning bolt, it has 6 for each. So a total of 18 air holes on each side of the rda; 36 total) on each side that can be opened and closed by twisting the top cap. The build deck has a three post design with large wire holes and a “T” style center post. These look to be slightly bigger than the original with slightly bigger holes drilled into them. It also looks like it has an adjustable copper 510 center pin. The Drip Tip Screws in and out, unlike the original Hollowpoint RDA. Choose from either black or stainless steel finishes.

    Learn More
    CA$24.99
  2. 9 Hells & 13 Heavens RDA Clone By Tobeco

    9 Hells & 13 Heavens RDA Clone By Tobeco

    The Tobeco 9 Hells & 13 heavens RDA is a clone of Compvapes latest rebuildable dripper, with square posts rocking 3mm holes any build is possible and to keep it cool an updated unique heat sink.

    Learn More
    CA$24.99
  3. Mutation X V4 RDA Clone By Tobeco

    Mutation X V4 RDA Clone By Tobeco

    The Tobeco Mutation X V4 RDA is a clone of Indulgence. Mutation X V4 is an atomizer built to offer as powerful airflow as possible in order to produce huge clouds. It has nine air holes on each side and by turning its body the holes opens or closes allowing for a large variety of air flow controls (AFC). Also beneith the coil there is 3 air holes on each side. Mutation X is an RDA yet it has a small container of e-juice (juice well) as in V4 deeper into its predecessors. Mutation X has four posts which allows for a variety of types of coil builds.

    Learn More
    CA$21.99
  4. Mutation X V4 Mini RDA Clone By Tobeco

    Mutation X V4 Mini RDA Clone By Tobeco

    Everything you loved about the Mutation X V4 but smaller! The Mutation X V4 RDA is the latest rebuildable atomizer by Indulgence. The Mutation X V4 is an authentic RDA. This unique dripper is original and made by Unicig. Airflow is routed from under the coils and the adjustable air slots are under the deck. This RDA is version 4 of the Mutation X line. This version features a re-designed top cap and drip tip. Air is now routed from underneath the coils as well as the signature barrel holes. The airflow under the coils is adjustable. Comes with drip tip adapter for 510 drip tips. Also comes with wide bore drip tip. A mini screwdriver, replacement o-rings, and screws and included.

    Learn More
    CA$21.99
  5. Hellboy RDA Clone by Tobeco

    Hellboy RDA Clone by Tobeco

    While up until this point all the rebuildable dripping atomizers have been round but with all the square box mods available something like this had to come out sooner or later, and this Hellboy RDA is going to look awesome on all your square box mods! Once you remove the Hellboy RDA’s square top cap you’ll find the familiar circular build deck with a very large juice well. It has a quad post hole design making it easy to build on, plus the post holes are a huge 2.5mm in diameter so you can slap virtually any build you want on here. If you want an RDA that’s different, square, and will look sick on all your square box mods then check out the Hellboy RDA Clone by Tobeco!

    Learn More
    CA$23.99
  6. Tugboat V2 RDA Clone by Tobeco

    Tugboat V2 RDA Clone by Tobeco

    The Tugboat V2 RDA Clone by Tobeco has the same deep juice wells like the V1,but now has adjustable airflow. The 3 piece design puts the airflow in the top cap and is adjustable by rotating the top cap.

    Learn More
    CA$21.99
  7. Mephisto with Copper Ring RDA Clone by Tobeco Cooper

    Mephisto with Copper Ring RDA Clone by Tobeco Cooper

    With the constant necessity for slight improvements on rebuildables, the Mephisto RDA (rebuildable drip atomizer) clone may be the next solution. Made from stainless steel, the atomizer consists of 3 posts (2 negative 1 positive), and the center post surrounded by a high heat delrin insulator. The massive post holes allows braided or thick gauge wires to be inserted through making it effortless. Three large flat head shaped screws are fitted in the posts, a large deep well for ample amount of liquid consumption with your build configuration. Another feature is the fitted delrin on the top cap to reduce heat from traveling onto your drip tip. Also, the cap is equipped with your choice of 4 different air control rings in copper, black, stainless steel and brass, which can be adjusted around the dual slit design air holes. Finally, the 510 threaded connection can be attached to most popular devices with the accommodation of a copper center pin for maximum conductivity.

    Learn More
    CA$24.99
  8. Velocity RDA Clone by Tobeco

    Velocity RDA Clone by Tobeco

    The Velocity RDA Clone by Tobeco is 1:1 clone of the Authentic Velocity RDA by Cisco (AvidVaper) and Dino Ferrari.  The Velocity RDA features two posts with 4 post holes for an easy quad coil build.  The cap includes a locking mechanism that prevents you from screwing your atomizer down to tightly while adjust the airflow.  The airflow options are endless due to have 2 large slotted holes and 6 smaller holes up top.  The juice well holds well over 5mL of juice so the flavor is just as great as the vapor production.

    Learn More
    CA$23.99

    Out of stock

  9. Tsunami RDA by Geek Vape

    Tsunami RDA by Geek Vape

    The Tsunami by Geek Vape welcomes you with an overwhelming flow of vapor once that first build is put in place and fired up! The Tsunami is equipped with an improved Velocity style deck and rectangular holes better for a fancy build. Two Kennedy style airflow holes sit beneath the coils for superior flavor. Built with a PEEK insulator to withstand the heat and usage from your sub ohm builds, the Tsunami is constructed of the highest quality materials. The gold-plated adjustable pin allows for maximum conductivity and a flush fit on any mod. The Tsunami comes in black and stainless as well as three different kinds of drip tips to make the unit fit just for your perfect vaping style. 

    Learn More
    CA$24.99

9 Item(s)

Grid  List